Epson Expression XP-300 Driver Download and Setup

Posted on

Epson Expression XP-300 Driver Download, Wireless Setup, Reviews, Manual Instructions, Scanner Driver Software Download For Mac, LinuxWindow – Epson Expression XP-300 ($ 50) is an affordable multifunction inkjet printer that provides start-up printing, scanning, and copying. There is no premium functionality such as duplexer to develop two-sided printing, automatic paper feeder (ADF) for copying or scanning multipage files, or paper tray 2 for drawing paper. But even if you are fine with the tradeoff, you still need perseverance, especially when printing images. XP-300 is slowpoke when printing on glossy paper.

Epson Expression XP-300 driver
Epson Expression XP-300

Unlike other multifunctional versions, including the input tray on the front of the device, the Epson Expression XP-300 input tray is at the back of the framework. It’s vertical, folded over devices; You picked it up and returned it and also dropped your paper. Lift the cover over the device to get to the scanner.

The Epson Expression XP-300 has a control panel on the front edge of the printer facing upwards of about 45 levels. At the control panel facility, there is a 2.5 inch LCD, which is not a touchscreen. To his left was a house switch, and also to his right, there was a rest of control. This control is not a conventional switch. Instead, the surface area is a touch panel, where a light tap on the corresponding symbol makes your choice. The resulting tray is under the control panel, with slide-out sleeves as well as external catches. The left side of the front panel has an SD flash memory card port. After installing the sd card, you can use the touchpad switch to select the image or document you want to print. Along with printing images from the SD card, you can use them to preserve the document being examined.

Epson Expression XP-300 provides high-quality prints, highlighted by attractive graphics. The message looks pretty sharp, and graphics are also published with abundant nuances and also good information. Our inspection photos are published on glossy photo paper using some information and intense nuance. XP-300 makes copies that match the evaluated inkjet printers; messages and also graphics are a bit shed, but it deserves to have a tendency to be precise. Epson Expression XP-300 Driver Download and Setup

Recommended: Epson Expression XP-200 Driver Download

Os CompatibleSpecificationHow to SetupDOWNLOAD DRIVER

Operating Systems Epson ET-300:

Windows 10 / Windows 8, 8.1 (32 bits, 64 bits) /Windows 7 (32 bits, 64 bits) / Windows Vista (32 bits, 64 bits) / Windows XP SP3 (32 bits) / Windows XP Professional x64 /  Windows Server 20125 / Windows Server 2008 R25 / Windows Server 20085 / Windows Server 2003 R25 / Windows Server 20035 – /Mac OSX 10.12 / 10.11 / 10.10 / 10.9 / 10.8 / 10.7 / 10.6 / 10.5 / 10.4 / Linux

Epson ET-300 Specs

Specifications

Type
Flatbed, Network (Wireless), All-in-One, Inkjet Color
Has Automatic Document Feeder
Y
Number of Sheets
100 sheets
Model Name
EPSON XP 300
System Requirements
Windows XP, Vista, 7, Mac OS X 10.5.8, 10.6, 10.7, 10.8.x
Connector Type
1 x USB 2.0
Operating System
Windows XP, Vista, 7, Mac OS X 10.5.8, 10.6, 10.7, 10.8.x, Windows XP, Vista, 7, Mac OS X 10.5.8, 10.6, 10.7
Model
XP300
Ink Color
COLOR:BLACK AND WHITE
Interface Type
Digital Media Card Reader
Brand
Epson
Volts
100/240V
Maximum Print Resolution
5760 x 1440 dpi
Video Game Platform
PC, Mac
Recommended Use
PRINT:COPY:ALL IN ONE:SCAN
Is Energy Star-Certified
Y
Manufacturer Part Number
XP300
Paper Size
4″ x 6″, 8.5″ x 11″, 8.5″ x 14″, A4, half letter, A6, user definable, 5″ x 7″, 16:9 wide
Container Type
Box
Color Pages Per Minute
15ppm
Assembled Product Dimensions (L x W x H)
15.40 x 11.80 x 5.70 Inches

Canon Epson Expression XP-300 Driver and Software Installation

Method 1: How To Install The Epson Expression XP-300 Driver Download

In this case, we are going to install Epson Expression XP-300 without CD (Automatic Wizard)

What you need:

  1. You are required to have a driver setup or the software file of Epson Expression XP-300. For the file of the driver setup, you simply click the link below for the download.
  2. You also obliged to have the USB cable as the connector from the printer to the computer that you will get from the printer package.

Next, follow the instruction on how to install Epson Expression XP-300 printer with the Setup File.

  1. First, of course, you need to turn on the computer as well as the Epson Expression ET-300 as well.
  2. Still, try not to connect the Epson Expression XP-300 printer USB cable first before it is suggested.
  3. Download the driver setup of Epson Expression XP-300 and install it in your computer by following all of the instruction for the installation progress.
  4. Then connect the USB cable of Epson Expression XP-300 when the installation of the driver setup is already finished. In this case, the wizard will analyze when the USB cable has already connected. When the USB cable of Epson Expression XP-300 already detected in the computer, it will go to further instructions.
  5. Follow the wizard instructions to finish the installation process.
  6. When it is finished, the Epson Expression XP-300 printer can be used for the printing process.

Method 2: How To Install Epson Expression XP-300 Driver Manual

When you choose this method, you need the help of “Add a printer” option from the Windows inbuilt feature.

What you need:

  1. You are obliged to have the Software/Driver Setup file of Expression XP-300. You can try to download it from the links provided.
  2. You also require the USB cable for Epson Expression XP-300 printer.

How to install:

  1. The first step, turn on all of your devices, in this case, are the computer and the Epson Expression XP-300 printer.
  2. Connect the USB cable of Epson Expression XP-300 from the printer to the computer.
  3. Next, extract Epson Expression XP-300 setup file and also their extracted location (it will be commonly found in TEMP folder)
  4. Click Start à Control Panel à View Devices & Printer (for Windows 7 and Vista OS). For XP OS, you can click on “Fax & Printers.
  5. Click on “Add a printer.”
  6. When it has been ready and adjusted for the driver’s location, give it the path where you extracted the setup file.
  7. Follow all of the wizard instructions to finish the installation.
  8. When you have done, you can use the Epson Expression XP-300 printer is ready to be used on your computer.

Method 3: Epson Expression XP-300 Driver Download Installation

How to install Epson Expression XP-300 Printer with software CD (Automatic Wizard)

What you need:

  1. You require CD/DVD drive installed on your personal computer.
  2. A Software/Driver CD Disk of Expression XP-300 that included the printer package is needed.
  3. USB Cable as the connector of the printer and computer that included in the printer package.

Follow these instructions for the further installation process of Epson Expression XP-300 printer with CD Drive.

  1. First of all, do not forget to turn on your computer and also the Epson Expression XP-300 printer.
  2. Do not plug in the USB cable of Epson Expression XP-300 printer until needed.
  3. Insert Epson Expression XP-300 CD disk to the CD/DVD drive on your personal computer and follow the setup wizard from the CD. Follow all of the instructions for the installation.
  4. Connect the USB Cable of Epson Expression XP-300 printer to the computer when the setup wizard asks you to plug in the USB Cable.
  5. Wait until the USB cable Epson Expression XP-300 is detected and follow the wizard instructions for the further process of the installation.
  6. When it is done, you will find out the Epson Expression XP-300 printer is ready to use.

How to Uninstall Epson Expression XP-300 Driver Printer

For Windows:

  1. Look for the Windows button on your device’s keyboard.
  2. Select Control Panel.
  3. Look for Uninstall a Program tab, select it.
  4. Look for the name of the printer driver you wish to uninstall.
  5. Click on the Uninstall button.
  6. Wait until the process is done.

For Mac:

  1. Open Apple Menu.
  2. Select System Preferences.
  3. Select Printers and Scanners.
  4. Choose a printer driver that you wish to uninstall. (Select Epson Expression XP-300 if your printer is of that type.)
  5. Click Remove.

Epson Expression XP-300 Wireless Connection Setup

(Note: If the printer is compatible with wireless)

Connecting with WPS

Requirement:

  1. Physical WPS push button must be present.
  2. The network must use WPA or WPA2 security.

Step 1

  1. Press printer’s Home button.

Step 2

  1. Use navigation arrows to select WLAN Setup icon.
  2. Press the left function button.

Wi-Fi lamp will light up after enabling wireless connection. Printer searches for access that supports WPS.

Step 3

  1. Press and hold WPS button for 5 seconds, release.
  2. Press the OK button after 2 minutes.
  3. After the connection is made, press OK to complete setup.

Install software for Epson Expression XP-300 .

If the connection still fails, please contact manufacturer.

Standard Connection Method

Step 1

  1. Press printer’s Home button.

Step 2

  1. Use navigation arrows to select WLAN Setup icon.
  2. Press the left function button.

Wi-Fi lamp will light up after enabling wireless connection. Printer searches for access that supports WPS.

Step 3

  1. Press the Stop/Reset button
  2. Select Standard setup then press OK button to start the process of standard setup.

The printer is searching for available wireless network.

  1. Use navigation arrows to select access point (the name of your network). Press OK.

Press left function button to search again if you cannot see your network on the list.

  1. Press OK to input/edit network password (case sensitive).

Use the virtual keyboard to enter a password. Follow the procedure as instructed:

  1. The password is case sensitive. Press the center function button to navigate between numeric, upper case, and lower case.
  2. Use navigation arrows to pick a character on the keyboard, press OK to confirm the selection, and move another character.
  3. Repeat step (a) and (b) for more characters to input.
  4. After inputting password, press left function button to complete.
  5. Confirm your password. Press OK to edit, if needed.
  6. Press left function button to complete setup. Press OK.

Follow by installing software for Epson Expression XP-300 .

If the connection still fails, please contact the manufacturer.

Epson Expression XP-300 – factory default settings

Step 1

  1. Press printer’s Home button.

Step 2

  1. Use navigation arrows to select Setup icon.
  2. Press the right function button.

Step 3

  1. Use left navigation arrow to select Device Settings.
  2. Press OK.

Step 4

  1. Use up navigation arrow to access LAN settings.
  2. Press OK.
  3. Use down navigation arrow to select Yes for reset setting.
  4. Press OK.
  5. WLAN Settings now reset. A message [Processing….Please wait momentarily] is shown.
  6. Press OK to complete resetting WLAN.

Epson Expression XP-300 Driver Download Windows x32/ x64

Download
Driver
Epson Expression XP-300 Remote Print Driver v1.66 (Windows)
Epson Expression XP-300 Scanner Driver and EPSON Scan Utility v3.7.9.3 (Windows)
Epson Expression XP-300 Drivers and Utilities Combo Package (Windows)
Epson Expression XP-300 Printer Driver v7.02 (Windows)

Epson Expression XP-300 Driver Download Mac: x32/ x64

Download
Driver
Epson Expression XP-300 ICA Scanner Driver v5.8.7 for Image Capture (Mac )
Epson Expression XP-300 Remote Print Driver v9.91 (Mac)
Epson Expression XP-300 Scanner Driver and EPSON Scan Utility v4.0.1.0 (Mac)
Epson Expression XP-300 Epson Event Manager v2.51.52 (Mac)

Epson Expression XP-300 Driver ESC/P-R Driver (generic driver)

Information
[Notice] In order to install these drivers, you need to install LSB package (version 3.2 or later) beforehand.Ubuntu:
# apt-get install lsbFedora:
# yum install lsbOpenSUSE:
# yast –install lsb
File nameFile size
epson-inkjet-printer-escpr-1.6.17-1lsb3.2.i486.rpm3.27 MBDownload
epson-inkjet-printer-escpr_1.6.17-1lsb3.2_i386.deb3.71 MBDownload
epson-inkjet-printer-escpr-1.6.17-1lsb3.2.x86_64.rpm3.28 MBDownload
epson-inkjet-printer-escpr_1.6.17-1lsb3.2_amd64.deb3.7 MBDownload
epson-inkjet-printer-escpr-1.6.17-1lsb3.2.src.rpm3.42 MBDownload
epson-inkjet-printer-escpr-1.6.17-1lsb3.2.tar.gz3.69 MBDownload
You do not need to go to one other site you will get an Epson Expression XP-300 Driver at epsondriverseries.com which provides downloadable web links for drivers as well as software directly from Canon’s main site. Just click on the web download link provided below and also follow the manual instructions or you can also download the user manual listed below to complete the available installation procedures.